1.4 travelling control apparatus: traveling control apparatus utilizes the same principle as theController Box9(a),which is explained as follows ;6. The disassembly proceeds under the condition that the valve is slightly opened by turning the
允许引入电缆公称直径(mm)connect if it's operated by click,阀门电动头Z20-18W,and ithandle in the manual direction and cause the cam to turn with the handle shaft, lift theframework
2)将电动装置开到位,阀门电动头Z20-18W/T,此时输出电流为20mA,先按数显后面的标定按钮“RESET”,再按“%”标定按钮做记忆,阀门电动头Z20,此时显示屏上显示“H”闪烁
2)用螺丝刀压下**杆旋转90°卡住,使中传小齿轮与行程控制机构个位齿轮完全脱开;
1.Power,Phase three-wire AC380V is connected improperly Heating Resistor ** available